Skip to content
MountainsideFoam & Coating, Sacramento24/7 roof line(916) 963-8097

Sacramento roofing and coating cost guide

Typical 2026 ranges for every service we offer, from foam recoats to full tile underlayment replacement.

Roofer measuring a flat roof for a coating estimate
How to read this

These are typical Sacramento ranges, not quotes. Roof size, layers, deck condition, access and the product system all move the number. The real price comes after we inspect the roof.

ServiceTypical rangePricedTypical job
Spray Foam Roofing$4.85 to $7.40per sq ftA 1,400 sq ft flat roof on a mid-century home, with 1.5 inch foam and a silicone coating, typically lands near 8,900 to 9,800 after inspection.
Foam Roof Repair$485 to $1,640per jobA few pecked holes and one cracked curb on a residential foam roof typically cost near 780 to 1,150 for cutting, respraying and recoating.
Foam Roof Recoating$1.65 to $3.10per sq ftRecoating a 2,000 sq ft foam roof with two coats of silicone typically costs near 5,200 to 6,400 once repairs and prep are added.
Ponding Water Repair$785 to $4,650per jobA 500 sq ft ponding area on a flat commercial roof, built up with tapered foam and coated in silicone, typically costs near 2,300 to 3,400.
Parapet Wall Repair$890 to $6,200per jobRepairing and coating about 120 linear feet of stucco parapet with a new cap seal typically costs near 3,400 to 4,900.
Spray Foam Insulation$1.45 to $3.95per sq ftA typical 1,600 sq ft attic roof deck sprayed with 3 inches of open-cell foam costs near 3,500 to 5,200, including prep and barrier.
Silicone Roof Coating$2.15 to $4.30per sq ftA 3,000 sq ft low-slope commercial roof with seam treatment and a two-coat silicone system typically costs near 9,400 to 12,200.
Acrylic Roof Coating$1.35 to $2.70per sq ftA 1,800 sq ft metal roof on a small commercial building with rust treatment and two acrylic coats typically costs near 3,300 to 4,500.
Polyurethane Roof Coating$2.40 to $4.90per sq ftA 2,500 sq ft commercial foam roof with a urethane base coat, silicone topcoat and walk pads typically costs near 8,200 to 11,000.
Metal Roof Coating$2.05 to $4.15per sq ftA 2,200 sq ft corrugated metal roof with rust treatment, fastener sealing and two acrylic coats typically costs near 5,600 to 7,900.
Flat Roof Coating$1.95 to $4.05per sq ftA 4,000 sq ft modified bitumen roof on a small office building, with repairs and two coats of acrylic, typically costs near 9,800 to 14,600.
Cool Roof Coating$1.55 to $3.60per sq ftA 2,400 sq ft flat roof on a small commercial building, cleaned, repaired and coated with white acrylic, typically costs near 4,300 to 6,200.
Mobile Home Roof Coating$1,150 to $3,480per jobA typical 14 by 66 foot single-wide with seam sealing, screw replacement and two acrylic coats runs near 1,850 to 2,640.
Roof Repair$485 to $2,860per jobA typical shingle repair with one new pipe boot, a handful of replaced shingles and a short run of flashing lands around 740 to 1,380.
Emergency Roof Repair$620 to $3,480per jobA storm call with a tarp over a 10 by 12 foot damaged area and a few replaced shingles typically runs 780 to 1,520 for the emergency visit.
Roof Leak Detection$245 to $780per jobA hard-to-find leak on a single-story home with attic access and a one-visit water test typically costs around 395 to 560 for detection alone.
Roof Flashing Repair$265 to $1,420per jobReplacing a pipe boot and re-flashing one short wall section on a shingle roof typically costs around 385 to 640.
Dry Rot & Roof Deck Repair$385 to $6,900per jobReplacing about four sheets of rotted plywood sheathing plus a short section of fascia typically costs around 1,180 to 2,140 including new underlayment.
Fascia & Soffit Repair$12.40 to $31.60per linear ftReplacing 90 feet of painted wood fascia and vented soffit on a single-story home with new drip edge often runs around 1,950 to 2,900.
Skylight Repair & Replacement$285 to $3,480per jobA leaking deck-mounted skylight on a shingle roof typically costs around 465 to 890 to re-flash, while replacing the unit with new flashing often runs 1,380 to 2,260.
Roof Inspection$185 to $465per jobA single-story home with a shingle or tile roof and attic access typically falls around 265 to 340 for a full inspection with photo findings.
Roof Certification$185 to $745per jobA single-story shingle home with a clean inspection and no repairs typically lands around 295 to 395 for the inspection and letter.
Roof Maintenance Plans$195 to $640per jobA single-story home with a shingle roof and one visit for cleaning and sealant touch-ups typically costs around 245 to 360.
Gutter Installation & Repair$8.40 to $19.80per linear ftA single-story home with 150 linear feet of 5-inch K-style gutters and four downspouts typically costs around 1,640 to 2,730 installed.
Roof Replacement$9,400 to $31,800per jobA 1,900 sq ft single-story home with architectural asphalt shingles and moderate deck repair commonly lands between 11,600 and 17,300.
Asphalt Shingle Roofing$4.90 to $9.30per sq ftA 2,000 sq ft home with architectural shingles, synthetic underlayment and minor deck repair commonly runs about 11,400 to 16,200.
Tile Roof Repair$640 to $3,720per jobReplacing about a dozen broken concrete tiles and patching underlayment near a valley typically runs 960 to 1,840.
Tile Roof Underlayment Replacement$8.60 to $16.90per sq ftA 2,400 sq ft concrete tile roof with new synthetic underlayment, replaced flashing and a few new tiles commonly runs 21,500 to 33,800.
Metal Roofing$9.80 to $19.40per sq ftA 2,200 sq ft home with 24-gauge standing seam panels, new underlayment and trim commonly runs about 26,800 to 38,500.
Stone-Coated Steel Roofing$11.60 to $21.90per sq ftA 2,200 sq ft ranch with a shake-profile steel roof, new underlayment and ridge details often runs around 31,000 to 41,500.
Wood Shake Roof Replacement$9.45 to $19.80per sq ftA 2,400 sq ft single-story roof with shake tear-off, new OSB over skips and Class A shingles often runs around 26,800 to 33,500.
Fire-Resistant Roofing$6.80 to $17.40per sq ftA 2,100 sq ft foothill home with a Class A composition shingle roof and new ember-resistant vents typically costs around 9.10 to 11.60 per sq ft.
Solar Panel Removal & Reinstall$180 to $410per panelA 20-panel residential array removed and reset around a shingle reroof typically adds about 4,100 to 7,800 to the roofing job, depending on racking and wiring.
Roof Ventilation$385 to $2,640per jobAdding a ridge vent and clearing soffit intake on a typical single-story home with a shingle roof usually costs around 860 to 1,740.
Patio Cover & Carport Roofing$385 to $3,150per jobRe-flashing a ledger and coating a 14 by 20 foot low-slope patio cover typically costs around 1,240 to 2,060.
Flat Roof Repair$560 to $3,940per jobA typical repair of two seams, one blister and a cracked pipe flashing on a residential low-slope roof runs about 890 to 1,640.
Flat Roof Replacement$6.40 to $15.80per sq ftA 1,400 sq ft low-slope roof with TPO and tapered insulation commonly runs about 11,800 to 17,900 installed.
TPO Roofing$6.10 to $12.60per sq ftA 4,000 sq ft commercial roof with 60 mil fully adhered TPO and new insulation commonly runs about 32,500 to 46,800.
Modified Bitumen Roofing$6.80 to $13.40per sq ftA 2,800 sq ft apartment building roof with a two-ply torch-applied system commonly runs about 22,400 to 32,700.
Built-Up Roof Repair$540 to $3,620per jobRepairing four blisters, a split near a wall and a section of cracked flashing on a small commercial BUR roof typically runs about 1,180 to 2,140.
EPDM Rubber Roofing$5.40 to $10.90per sq ftA 600 sq ft garage and patio flat roof with fully adhered 60 mil EPDM, new edge metal and flashing commonly runs 4,200 to 6,100.
Roof Drain & Scupper Repair$265 to $1,980per jobReflashing and sealing one internal drain and installing a new dome on a foam or single-ply roof often costs around 485 to 925.
Commercial Roofing$3.10 to $14.60per sq ftA 9,000 sq ft strip-mall roof recoated with silicone after repairs typically lands around 4.35 to 6.20 per sq ft.
HOA & Multi-Family Roofing$6.80 to $17.50per sq ftCoating and drain rebuilds on a 12,000 sq ft flat-roofed apartment building commonly run around 78,000 to 126,000, while tile underlayment replacement on a townhome row costs more per square.
FAQ

Questions about roofing prices

Why are foam roof prices quoted per square foot?

Foam and coating jobs are mostly material and spray time, and both scale with area and thickness. A per square foot figure lets you compare bids on the same basis. Ask every bidder for the foam thickness in inches and the coating in dry mils, because a cheaper bid is often just a thinner roof.

What usually makes a Sacramento roofing job cost more than the range?

Wet insulation or deck that has to come out, multiple old layers, tall or hard-to-reach buildings, lots of penetrations and curbs, and permit or Title 24 cool roof requirements on a reroof. Each of those shows up during the inspection, which is why the range is only a starting point.

Are these prices for homes or commercial buildings?

The ranges cover typical residential and small commercial jobs around Sacramento. Large warehouses often land at the low end per square foot because of scale, while small, cut-up roofs land at the high end because setup takes the same time either way.

Roof leaking, peeling or baking in the sun?

Call the 24/7 line. Tell us the roof type, where the water shows up or what the coating looks like, and we will tell you what we would check first and when a crew can be there.

Call (916) 963-8097
Call 24/7 (916) 963-8097