Skip to content
MountainsideFoam & Coating, Sacramento24/7 roof line(916) 963-8097

Roofing for HOAs and apartments

HOA and multi-family roofing in Sacramento, CA

A board has to spend reserve money on roofs that residents rarely see, keep units dry during work and explain every decision to the owners who pay for it.

Typical range$6.80 to $17.50
Pricedper sq ft
Phone lineOpen 24/7
Row of two-story townhomes with concrete tile roofs in a Natomas community
Quick answer

HOA and multi-family roofing covers townhome, condo and apartment complexes: roof condition surveys, phased reroofs building by building, repair programs and maintenance contracts. Pricing is bid per building, commonly 6.80 to 17.50 per sq ft depending on roof type. Timelines run from weeks to a full season for large complexes.

What this job involves

Complexes in places like Campus Commons, Natomas and Elk Grove often have dozens of roofs built at the same time, which means they wear out at the same time. Townhomes may carry concrete tile with aging underlayment, while garden-style apartments often have flat or low-slope roofs with tired membranes. A board that waits for leaks to guide its decisions ends up paying for emergency work.

Mountainside works with managers and boards to survey every building, rank them by condition and plan the work in phases that match the reserve budget. We provide itemized bids, schedules and resident notices, and we keep units dry throughout the job.

Warning signs

When a complex needs a roof plan

1Repeated leak calls

When several units report stains in the same winter, individual repairs are costing more than a planned program. A survey shows which buildings are driving the calls.

2Reserve study flags roofs

A reserve study lists remaining roof life. When the date is within a few years, bids and phasing should start so costs do not hit at once.

3Aging tile underlayment

Tile may look fine while the felt underneath is brittle. Townhome roofs in tract communities often need underlayment replaced well before the tile does.

4Flat roofs with failing coating

Apartment buildings with chalky, cracked or ponding flat roofs can often be restored with foam and coating instead of a tear-off.

5Insurance renewal questions

Carriers ask for roof age and condition on multi-building properties. A documented survey and repair plan helps answer them.

6Mixed repairs by different vendors

Patches from different companies over the years make it hard to know what is sound. A single survey and records set the baseline.

Surveys, reserve studies and phasing

We start with a roof-by-roof survey that records roof type, approximate age, visible defects, drainage and access. Findings are sorted into repair now, repair soon and replace or restore later. That gives the board a defensible priority list and a cost range for each building. Phasing spreads cost across budget years. A common plan is to start with the buildings that leak, then work through the rest in groups of a few buildings per year. Materials and details stay consistent across phases so the complex looks uniform. Reserve study consultants can use our condition notes to adjust their projections.

A heat-welded TPO seam beside a curb flashing on a commercial flat roof
A heat-welded TPO seam beside a curb flashing on a commercial flat roof.

Board approvals and resident communication

Boards need written scopes, multiple options and clear pricing to vote with confidence. We prepare bids that separate base work from options such as upgraded underlayment, new flashings or solar removal and reinstall. We can attend a meeting by phone to answer questions from the board. Residents get written notice before work starts: dates, hours, parking limits and what to expect. Crews work building by building, and each building is dried in the same day with tarps or completed roofing. Interior leak reports during the project go straight to the project lead.

  • Dated notices before each phase
  • Parking and access plan
  • Daily dry-in of open roof areas
  • Single contact for the manager
  • Photo documentation for the board

Foam, coatings and tile underlayment for common roof types

Flat-roofed apartment buildings often respond well to spray foam or a silicone or acrylic coating over a sound base. This keeps residents in place, avoids tear-off debris and can reduce heat in top-floor units. Wet insulation is cut out before foam goes on, and drains are rebuilt as needed. Townhomes with concrete tile need a different plan. We lift the tile, stage it on the roof, replace the underlayment and flashings, then reset the tile with broken pieces replaced. This restores the waterproofing layer without buying new tile for the whole community.

How the job runs

Our process for hoa & multi-family roofing

Six steps, in the order the crew does them on a Sacramento roof.

  1. Step 1Complex walk-through

    We meet the manager or board, collect repair history and walk the property to see each building type and access issue.

  2. Step 2Roof-by-roof survey

    Each roof is inspected, photographed and rated, with notes on drainage, flashings, penetrations and remaining life.

  3. Step 3Prioritized report

    You receive a ranked list of buildings with repair, restoration and replacement options and a cost range for each.

  4. Step 4Bid and board review

    Itemized bids are prepared for each phase, with options broken out so the board can vote on scope and budget.

  5. Step 5Phased construction

    Work proceeds building by building with resident notices, daily dry-in and one point of contact for the manager.

  6. Step 6Close-out and maintenance

    Each phase ends with a walkthrough, photos and records, followed by a scheduled maintenance plan for drains and flashings.

Cost

What hoa & multi-family roofing costs in Sacramento

MS-230 HOA & Multi-Family Roofing2026 range
$6.80 to $17.50per sq ft

Coating and drain rebuilds on a 12,000 sq ft flat-roofed apartment building commonly run around 78,000 to 126,000, while tile underlayment replacement on a townhome row costs more per square.

What moves the price
  • Roof type and condition
  • Number of buildings per phase
  • Wet insulation removal
  • Access, height and parking

Compare this job with others in the Sacramento roofing cost guide.

Sacramento conditions that matter

Multi-family housing in the Sacramento area spans mid-century apartments with flat roofs, 1980s to 2000s condo and townhome communities and newer tract developments in Natomas, Elk Grove and Roseville. Valley heat shortens the life of exposed membranes and underlayment, and winter storms from November to March mean schedules need weather slack. Many HOAs follow design rules for tile color and profile, so matching materials takes planning. Title 24 cool roof rules may apply to some reroofs, and top-floor units often benefit from reflective coatings that reduce summer heat.

FAQ

Questions about hoa & multi-family roofing

How should an HOA plan roof work around the reserve fund?

Start with a condition survey and compare it to the reserve study. Then phase work so each year's spending fits the fund, tackling leaking or worst-condition buildings first. Keep specs consistent across phases. Get written options so the board can choose repair, restoration or replacement per building based on cost and remaining life.

Can residents stay home during a townhome reroof?

Yes, in most cases. Noise and parking limits are the main impacts. Crews work in sections, dry in each area daily and give notices ahead of time. Attic access may be needed occasionally for flashing work. Residents with pets or night schedules should be told early so they can plan.

Is it better to reroof a whole complex at once or in phases?

Phasing is usually easier on budgets and residents, while a single project may bring a lower unit price and a uniform look. Reserves often decide it. We price both ways when asked, and a staged plan can still keep one material and color across all buildings.

Does tile underlayment replacement save money over a full reroof?

Often yes, when the tile is sound. The tile is lifted and reset, and only underlayment, flashings and broken pieces are replaced. It avoids buying new tile and hauling off old tile. If the tile is cracked widely or too brittle to lift, a full reroof may be the better route.

What does a roof maintenance contract include for an apartment complex?

Usually scheduled inspections, drain and gutter cleaning, sealing of small defects, debris removal and a photo report to the manager. Visits are commonly set before fall rains and after storms. Scope and frequency are agreed in writing, and larger repairs are quoted separately so the board approves them first.

Roof leaking, peeling or baking in the sun?

Call the 24/7 line. Tell us the roof type, where the water shows up or what the coating looks like, and we will tell you what we would check first and when a crew can be there.

Call (916) 963-8097
Call 24/7 (916) 963-8097